Epoxy flooring is a fantastic choice for an eco-friendly and efficient flooring option for the house, or garage. If you’re looking for a way to DIY (Do-It-Yourself) the epoxy flooring on garage floor, we are bringing you the guide. You don’t need to invest too much time, resources, or use excessive tools. It is fairly easy! Just follow these steps:
First, you need to check the condition of the floor. Concrete floors are best to apply epoxy flooring. Make sure that there aren’t any cracks and chips that are too intense. Then, conduct some cleaning work.
Pressure cleaning is one of the best ways to clean the garage floor for epoxy. However, you can also stick to the typical sweeping method. Just make sure that there isn’t any dirt or debris remaining.
The next step will be to cover the walls and the corners with painter’s tape. It prevents epoxy from sticking to walls and ruining them. Similarly, you will have to wear protective gloves, boosts, and even masks or goggles to protect yourself.
You will need this for the next step of etching.
Your epoxy flooring kit comes with an etching solution. It prepares the floor thoroughly for epoxy coating. So, mix it according to the instructions given. After that, apply it across the garage floor. There should be fizz and foams forming as you apply it. If this is the case, it means that the etching solution is doing the job.
Divide the etching work in sections. Start with the corner furthest from the exit point. Use scrubbing tools like brooms or brushes for the best results.
You will have two cans. One contains epoxy paint, and another has a hardener. You have to mix both of these together, thoroughly. It can take up to 3 minutes. For the perfect balance, follow the instructions given for the volume mixing. You might have to set it away for 30 minutes before you can apply it.
Once you prepare the solution, you will have around two hours to apply the epoxy solution. If you live in a hotter climate, you will have less time. But, there’s no need to rush. Take your time and use appropriate roller and paint brushes to spread and paint the garage floor.
If you want to use some flakes, the best way is to apply epoxy in sections and sprinkle some coloured flakes. Don’t wait to apply an epoxy solution on the entire floor and then use the flakes. By then, some corners might already dry out. So, divide the garage floor into sections, apply the epoxy coating, then sprinkle the flakes.
The epoxy kit comes with instructions to apply the second coat. So, make sure that you didn’t use all of it in the first coating. If you did, it’s time to buy some more. Either way, a second coat will apply on top of the existing layer.
That’s all! Now you can DIY the epoxy flooring for a garage floor. But, if you want flawless results, it would be better to get epoxy resin with Hychem Pty Ltd Melbourne.